また、自動Mode(LSB,USB,CW) 切替方式を採用。操作説明を含む関連資料は、JA2GQP's Download siteの
Arduino AD9850 DDSフォルダにアップロードしてある。
回路図である。 チャンネル切替をロータリＳＷからプッシュＳＷに変更し、ＥＮＴ ＳＷを追加。
Program
スケッチは、Arduino IDE1.6.9で開発したが、1.0.6で動作する事を確認している。//////////////////////////////////////////////////////////////////////
// AD9850 DDS VFO Premixed type program ver.1.2
//
// Copyright(C)2014-2016.JA2GQP.All rights reserved.
//
// 2016/7/16
// JA2GQP
//--------------------------------------------------------------------
// Function
// 1.RIT Operation(-50kHZ to 50kHZ)
// 2.STEP(1M,100k,10k,1k,100,10)
// 3.Memory Operation is Push ENT
// (Frequency and Step)
// 4.Protection Operation At The Time Of Transmission
// 5.Channel Memory(0-9ch)
// 6.Split Operation
//--------------------------------------------------------------------
// Library
// http://www.buxtronix.net/2011/10/rotary-encoders-done-properly.html
//
//////////////////////////////////////////////////////////////////////
#include <LiquidCrystal.h>
#include <rotary.h>
#include <EEPROM.h>
//---------- LCD Pin Assign ------------------
LiquidCrystal lcd(13, 12, 11, 10, 9, 8); // RS,R/W,DB4,DB5,DB6,DB7
//---------- Define Constant Value ----------
////////////////////////////////
// I/O assign
////////////////////////////////
const byte ENC_A = 2; // Encorder A
const byte ENC_B = 3; // Encoeder B
const byte SW_STEP = 4; // STEP Sw
const byte SW_RIT = 5; // RIT Sw
const byte SW_SPLIT = 6; // SPLIT Sw
const byte SW_TX = 7; // TX Sw
const byte W_CLK = 14; // DIO14(A0)
const byte FQ_UD = 15; // DIO15(A1)
const byte DATA = 16; // DIO16(A2)
const byte SW_CH = 17; // DIO17(A3)
const byte SW_ENT = 18; // ENT SW
////////////////////////////////
// default value
////////////////////////////////
const long DEF_LSB = -1500L; // LSB Offset(IF-1500Hz)
const long DEF_USB = 1500L; // USB Offset(IF+1500Hz)
const long DEF_CW = -600L; // CW Offset(IF-600Hz)
const long DEF_IF = 10700000L; // 10.7000MHz
const long DEF_VFO = 3; // Vfo Mode(TR+IF)
const long DEF_FRQ = 7050000L; // Init Frequency
const long DEF_STP = 1000L; // Init STEP
////////////////////////////////
// Limited range
////////////////////////////////
const long LW_FRQ = 0L; // Frequency Lower Limit
const long HI_FRQ = 30000000L; // Upper Limit
const long LW_VFO80 = 3500000L; // 3.5MHz Lower
const long MI_VFO80 = 3535000L; // Middle
const long HI_VFO80 = 3575000L; // Upper
const long LW_VFO40 = 7000000L; // 7MHz Lower
const long MI_VFO40 = 7045000L; // Middle
const long HI_VFO40 = 7200000L; // Upper
const long LW_VFO20 = 14000000L; // 14MHz Lower
const long MI_VFO20 = 14100000L; // Middle
const long HI_VFO20 = 14350000L; // Upper
const long LW_VFO15 = 21000000L; // 21MHz Lower
const long MI_VFO15 = 21150000L; // Middle
const long HI_VFO15 = 21450000L; // Upper
const long LW_VFO10 = 28000000L; // 28MHz Lower
const long MI_VFO10 = 28200000L; // Middle
const long HI_VFO10 = 29000000L; // Upper
const long LW_OFT = -10000L; // Offset Lower Limit
const long HI_OFT = 10000L; // Upper Limit
const long LW_RIT = -50000L; // RIT Lower Limit
const long HI_RIT = 50000L; // RIT Upper Limit
////////////////////////////////
// DDS parameter
////////////////////////////////
const unsigned long DDS_CLK = 125000000L; // AD9850 Clock
const unsigned long TWO_E32 = 4294967295L;// 2^32
const byte DDS_CMD = B00000000; // AD9850 Command
////////////////////////////////
// etc
////////////////////////////////
const byte Max_Chn = 10; // Max Channel(10ch)
const byte Int_End = 73; // Initial end code
const char *CALL = "JA2GQP "; // Display Call sign
//---------- EEPROM Memory Address ----------
const byte Frq_Eep = 0x00; // Frequency(4byte*10)
const byte Stp_Eep = 0x30; // STEP(4byte*10)
const byte Mode_Eep = 0x60; // Mode(1byte*10)
const byte Care_Eep = 0x70; // Career point(4byte* 4)
const byte If_Eep = 0x80; // IF(4byte*1)
const byte Chn_Eep = 0x90; // Channel(1byte*1)
const byte Vfo_Eep = 0x92; // Vfo mode(1byte*1)
const byte Sav_Eep = 0x94; // Vfo Frequency save(4byte*1)
const byte Eep_Int = 0x9e; // Eep Init(1byte*1)
//---------- Encorder Pin Assign(INT) --------
Rotary r = Rotary(ENC_A,ENC_B); // 2 = ENC_A,3 = ENC_B
//---------- Memory Assign -------------------
long Vfo_Dat; // Vfo Frequency
long Vfo_Datb; // Vfo data(old)
long RX_Dat; // RX DDS Out Data
long TX_Dat; // TX DDS Out Data
long Rit_Dat; // RIT Data
long Rit_Datb; // RIT Data Old
long Enc_Stp; // STEP
long Lng_Wk1; // Long Work1
long Lng_Wk2; // Long Work2
long If_Dat; // IF Frequency
char *Lcd_Dat = " "; // Lcd Display Buffer
byte Byt_Chn; // Channel SW
byte Byt_Chnb; // Channel SW Old
byte Flg_Rit; // RIT Flag
byte Flg_Ritb; // RIT Flag Old
byte Flg_Tx; // TX Flag
byte Flg_Spl; // SPLIT Flag
byte Flg_Mode; // Mode Flag
byte Byt_Mode; // Mode
byte Flg_LSB; // LSB Flag
byte Flg_USB; // USB Flag
byte Flg_CW; // CW Flag
byte Flg_SUB; // SUB Flag
byte Flg_Over; // Over Flag
byte Flg_Ent; // ENT Flag
byte Byt_Ent; // ENT Mode
byte Flg_If; // IF Flag
byte Flg_Vfo; // DDS Flag
byte Byt_Vfo; // VFO Mode
//---------- Initialization Program ---------------
void setup(){
lcd.begin(16, 2); // LCD 16*2
pinMode(SW_STEP,INPUT_PULLUP);
pinMode(SW_RIT,INPUT_PULLUP);
pinMode(SW_SPLIT,INPUT_PULLUP);
pinMode(SW_TX,INPUT_PULLUP);
pinMode(SW_CH,INPUT_PULLUP);
pinMode(SW_ENT,INPUT_PULLUP);
PCICR |= (1 << PCIE2);
PCMSK2 |= (1 << PCINT18) | (1 << PCINT19);
sei(); // INT Enable
pinMode(FQ_UD,OUTPUT);
pinMode(W_CLK,OUTPUT);
pinMode(DATA,OUTPUT);
Flg_Tx = 0;
Flg_Rit = 0;
Flg_Spl = 0;
lcd.clear();
if(EEPROM.read(Eep_Int) != Int_End){ // Eep initialaz
delay(10);
Fnc_Eep_Int();
}
Byt_Chn = EEPROM.read(Chn_Eep); // Channel
Byt_Chnb = Byt_Chn;
Fnc_Eep_Rd(); // EEPROM Read
}
//---------- Main program ---------------
void loop() {
if(Flg_Tx == 0){ // Tx off?
if(digitalRead(SW_STEP) == LOW) // STEP Sw On?
Fnc_Stp();
if(digitalRead(SW_ENT) == LOW) // ENT SW On?
Fnc_Ent();
if((Flg_Mode == 0) && (Flg_Spl != 2)){
if(digitalRead(SW_RIT) == LOW) // RIT Sw On?
Fnc_Rit();
}
if((Flg_Ent == 0) && (Flg_Rit != 2)){
if(digitalRead(SW_SPLIT) == LOW) // SPLIT Sw On?
Fnc_Spl();
if((digitalRead(SW_CH) == LOW)) // CH SW On?
Fnc_Chsw();
}
if(Byt_Chnb != Byt_Chn){ // CH SW OLD != NEW?
Fnc_Eep_Wt(Byt_Chnb);
Byt_Chnb = Byt_Chn;
Fnc_Eep_Rd();
}
if(Flg_Ent == 1) // ENT proc.?
Fnc_Prm();
}
if(digitalRead(SW_TX) == LOW) // Tx On?
Flg_Tx = 1;
else
Flg_Tx = 0;
Fnc_Band(Vfo_Dat+Rit_Dat); // Range check
Fnc_If(Byt_Vfo);
if(Flg_Tx == 0)
Fnc_Dds(RX_Dat); // AD9850 DDS RX set
else{
if(Flg_Over == 0) // Frequency not range over?
Fnc_Dds(TX_Dat); // AD9850 DDS TX set
else
Fnc_Dds(0L); // DDS 0Hz
}
Fnc_Lcd(); // LCD Display
}
//---------- Encorder procedure(INT) ---------------
ISR(PCINT2_vect) {
unsigned char result = r.process();
if(Flg_Tx == 0){
if(result) {
if(result == DIR_CW){
Lng_Wk1 = Vfo_Dat + Enc_Stp;
Lng_Wk2 = Rit_Dat + Enc_Stp;
}
else{
Lng_Wk1 = Vfo_Dat - Enc_Stp;
Lng_Wk2 = Rit_Dat - Enc_Stp;
}
if((Flg_Rit == 1) || (Flg_Spl == 1))
Rit_Dat = Lng_Wk2;
else{
if((Flg_Rit == 2) || (Flg_Spl == 2) || (Flg_Rit == 0) || (Flg_Spl == 0))
Vfo_Dat = Lng_Wk1;
else
Rit_Dat = 0;
}
if(Flg_Mode == 0)
Vfo_Dat = constrain(Vfo_Dat,LW_FRQ,HI_FRQ);// VFO range check
else
Vfo_Dat = constrain(Vfo_Dat,LW_OFT,HI_OFT);// Offset range check
Rit_Dat = constrain(Rit_Dat,LW_RIT,HI_RIT); // RIT range check
}
}
}
//---------- Function DDS set ---------------
void Fnc_Dds(double frquency){
unsigned long wrk = frquency * TWO_E32 / DDS_CLK;
digitalWrite(FQ_UD,LOW);
shiftOut(DATA,W_CLK,LSBFIRST,wrk);
shiftOut(DATA,W_CLK,LSBFIRST,(wrk >> 8));
shiftOut(DATA,W_CLK,LSBFIRST,(wrk >> 16));
shiftOut(DATA,W_CLK,LSBFIRST,(wrk >> 24));
shiftOut(DATA,W_CLK,LSBFIRST,DDS_CMD); // AD9850 command
digitalWrite(FQ_UD,HIGH);
}
//---------- Function Encorder STEP ---------
void Fnc_Stp(){
if(Enc_Stp == 10) // Step = 10Hz ?
Enc_Stp = 1000000; // Yes,1MHz set
else
Enc_Stp = Enc_Stp / 10; // Step down 1 digit
Fnc_Step_Disp();
while(digitalRead(SW_STEP) == LOW)
;
}
//---------- Function STEP Display ----------
void Fnc_Step_Disp(){
lcd.setCursor(0,1);
switch(Enc_Stp){
case 10:
lcd.print("10 ");
break;
case 100:
lcd.print("100 ");
break;
case 1000:
lcd.print("1k ");
break;
case 10000:
lcd.print("10k ");
break;
case 100000:
lcd.print("100k");
break;
case 1000000:
lcd.print("1M ");
break;
default:
lcd.print("1k ");
Enc_Stp = 1000;
break;
}
}
//---------- Function String Dot Edit --------
char *Fnc_Dot_Edit(char *str,long n){
int i = 0; // Write the number
char *p = str;
unsigned long u = abs(n);
do{
*p++ = "0123456789"[u % 10];
u = u / 10;
i++;
if((0 != u) && (0 == (i % 3)))
*p++ = '.';
}
while( 0 != u );
if ( n < 0 )
*p++ = '-';
*p = '\0';
Fnc_Revr( str );
return str;
}
//---------- Function String Reverse ---------
void Fnc_Revr(char *str){
int i,n;
char c;
n=strlen(str);
for(i = 0;i < n / 2;i++){
c=str[i];
str[i]=str[n - i - 1];
str[n - i - 1]=c;
}
}
//---------- Function Save EEPROM 4byte ---------
void Fnc_Eep_Sav4(long value,int address){
address += 3;
for(int i = 0;i < 4;i++){
byte toSave = value & 0xFF;
if(EEPROM.read(address) != toSave){
EEPROM.write(address,toSave);
}
value = value >> 8;
address--;
}
}
//---------- Function Load EEPROM 4byte ---------
long Fnc_Eep_Lod4(int address){
long value = 0;
for(int i = 0;i < 4;i++){
value = value | EEPROM.read(address);
if( i < 3){
value = value << 8;
address++;
}
}
return value;
}
//---------- Function LCD Display ---------
void Fnc_Lcd(){
lcd.setCursor(0,0);
if(Flg_Tx == 1)
lcd.write('T');
else if(Flg_Ent == 1)
lcd.write('P');
else
lcd.print(Byt_Chn);
Fnc_Step_Disp();
if(Flg_Rit == 1){ // Rit display
lcd.setCursor(5,1);
if(Rit_Dat != Rit_Datb){
lcd.print("R ");
Rit_Datb = Rit_Dat;
}
lcd.setCursor(6,1);
if(Rit_Dat >=0)
lcd.write('+');
Fnc_Dot_Edit(Lcd_Dat,Rit_Dat);
lcd.print(Lcd_Dat);
}
if(Flg_Spl == 1){ // Split display
lcd.setCursor(5,1);
if(Rit_Dat != Rit_Datb){
lcd.print("T ");
Rit_Datb = Rit_Dat;
}
lcd.setCursor(6,1);
if(Rit_Dat >=0)
lcd.write('+');
Fnc_Dot_Edit(Lcd_Dat,Rit_Dat);
lcd.print(Lcd_Dat);
}
if((Flg_Over == 1) && (Flg_Ent == 0)){
Fnc_Fdsp(Vfo_Dat);
lcd.setCursor(14,1);
lcd.print("ov");
}
else
Fnc_Fdsp(Vfo_Dat);
if((Flg_Over == 0) && (Flg_Ent == 0)){
lcd.setCursor(14,1);
lcd.write(' ');
lcd.write(' ');
}
if((Flg_Vfo == 0) && (Flg_If == 0) && (Flg_Rit == 0) && (Flg_Spl == 0) && (Flg_Mode == 0)){
lcd.setCursor(5,1);
lcd.print(CALL);
}
}
//---------- Function Frequency Display -------------------
void Fnc_Fdsp(long f_disp){
Fnc_Dot_Edit(Lcd_Dat,f_disp);
lcd.setCursor(1,0);
if(f_disp != Vfo_Datb){
lcd.write(':');
for(int i=0;i<10;i++)
lcd.write(' ');
Vfo_Datb = f_disp;
}
lcd.setCursor(2,0);
lcd.print(Lcd_Dat);
if(Flg_Mode == 0)
Fnc_Mdisp();
if((Flg_If == 1) || (Flg_Vfo == 1)){
lcd.setCursor(13,0);
for(int i=0;i<3;i++)
lcd.write(' ');
}
}
//---------- Function Mode Display -----------------------
void Fnc_Mdisp(){
lcd.setCursor(13,0);
switch(Byt_Mode){
case 0: // LSB
lcd.print("LSB");
break;
case 1: // USB
lcd.print("USB");
break;
case 2: // CW
lcd.print("CW ");
break;
}
}
//---------- Function Rit ---------
void Fnc_Rit(){
if(Flg_Vfo == 0){
if(Flg_Rit == 0){
if(Flg_Spl == 1)
Flg_Spl = 0;
Flg_Rit = 1;
lcd.setCursor(5,1);
lcd.print("R ");
if(Rit_Dat >=0){
lcd.setCursor(6,1);
lcd.write('+');
Fnc_Dot_Edit(Lcd_Dat,Rit_Dat);
lcd.print(Lcd_Dat);
}
}
else{
lcd.setCursor(5,1);
lcd.print(CALL);
Flg_Rit = 0;
Rit_Dat = 0;
}
}
else
Byt_Vfo++;
while(digitalRead(SW_RIT) == LOW)
;
}
//---------- Function Channel SW Check ---------
void Fnc_Chsw(){
byte cnt = 0;
Byt_Chn++;
while(digitalRead(SW_CH) == LOW){
delay(500);
cnt++;
if(6 <= cnt){ // Eep Initial start(3sec)?
Fnc_Eep_Int();
Byt_Chn = EEPROM.read(Chn_Eep); // Channel
Byt_Chnb = Byt_Chn;
Fnc_Eep_Rd(); // EEPROM Read
lcd.setCursor(0,0); // LCD display
lcd.print(Byt_Chn);
Fnc_Fdsp(Vfo_Dat);
lcd.setCursor(5,1);
lcd.print("Init End ");
}
}
}
//---------- Function Eeprom Initialization -----------------
void Fnc_Eep_Int(){
int i;
for (i=0;i<160;i++) // 0 clear(160byte)
EEPROM.write(i, 0);
for(i=0;i<Max_Chn;i++){
Fnc_Eep_Sav4(DEF_FRQ,Frq_Eep+i*4); // Frequency(7.05MHz)
Fnc_Eep_Sav4(DEF_STP,Stp_Eep+i*4); // Step(1kHz)
}
Fnc_Eep_Sav4(DEF_IF,If_Eep); // IF(10.7MHz)
Fnc_Eep_Sav4(DEF_LSB,Care_Eep+0); // LSB Offset(-1500Hz)
Fnc_Eep_Sav4(DEF_USB,Care_Eep+4); // USB Offset(1500Hz)
Fnc_Eep_Sav4(DEF_CW,Care_Eep+8); // CW Offset(-600Hz)
EEPROM.write(Vfo_Eep,DEF_VFO); // Vfo Mode
EEPROM.write(Eep_Int,Int_End); // Init end set(73)
}
//---------- Function EEPROM Read ---------
void Fnc_Eep_Rd(){
if((0 <= Byt_Chn) && (Byt_Chn < Max_Chn))
Vfo_Dat = Fnc_Eep_Lod4(Frq_Eep+Byt_Chn*4);
else{
Vfo_Dat = Fnc_Eep_Lod4(Frq_Eep+0*4);
Byt_Chn = 0;
}
if((0 <= Byt_Chn) && (Byt_Chn < Max_Chn))
Enc_Stp = Fnc_Eep_Lod4(Stp_Eep+Byt_Chn*4);
else
Enc_Stp = Fnc_Eep_Lod4(Stp_Eep+0*4);
If_Dat = Fnc_Eep_Lod4(If_Eep);
Byt_Vfo = EEPROM.read(Vfo_Eep);
}
//---------- Function EEPROM Write -----------------------
void Fnc_Eep_Wt(byte chn){
if((0 <= chn) && (chn < Max_Chn)){
Fnc_Eep_Sav4(Vfo_Dat,Frq_Eep+chn*4);
Fnc_Eep_Sav4(Enc_Stp,Stp_Eep+chn*4);
}
EEPROM.write(Chn_Eep,Byt_Chn);
}
//---------- Function Split ---------
void Fnc_Spl(){
if(Flg_Spl == 0){
if(Flg_Rit == 1)
Flg_Rit = 0;
Flg_Spl = 1;
lcd.setCursor(5,1);
lcd.print("T ");
if(Rit_Dat >=0){
lcd.setCursor(6,1);
lcd.write('+');
Fnc_Dot_Edit(Lcd_Dat,Rit_Dat);
lcd.print(Lcd_Dat);
}
}
else{
lcd.setCursor(5,1);
lcd.print(CALL);
Flg_Spl = 0;
Rit_Dat = 0;
}
while(digitalRead(SW_SPLIT) == LOW)
;
}
//---------- Function ENT --------------------------------
void Fnc_Ent(){
byte cnt = 0;
if(Flg_Ent == 0){
if(Flg_Rit == 1){
Flg_Rit = 2;
lcd.setCursor(5,1);
lcd.write('r');
}
else
if(Flg_Rit == 2){
Flg_Rit = 1;
lcd.setCursor(5,1);
lcd.write('R');
}
if(Flg_Spl == 1){
Flg_Spl = 2;
lcd.setCursor(5,1);
lcd.write('t');
}
else
if(Flg_Spl == 2){
lcd.setCursor(5,1);
lcd.write('T');
Flg_Spl = 1;
}
Fnc_Eep_Wt(Byt_Chn);
while(digitalRead(SW_ENT) == LOW){
delay(500);
cnt++;
if(6 <= cnt){ // Parameter change mode(3sec)
lcd.setCursor(0,0);
lcd.print("P");
Flg_Ent = 1;
Flg_Rit = 0;
Flg_Spl = 0;
Byt_Ent = 0;
if(Flg_If == 0){
Fnc_Eep_Sav4(Vfo_Dat,Sav_Eep);
Vfo_Dat = Fnc_Eep_Lod4(If_Eep);
Flg_If = 1;
}
Fnc_Fdsp(Vfo_Dat);
lcd.setCursor(5,1);
lcd.print("IF ");
}
}
}
else{
while(digitalRead(SW_ENT) == LOW){
delay(500);
cnt++;
if(6 <= cnt){ // Return Parameter cahne mode(3sec)
lcd.setCursor(0,0);
lcd.print(Byt_Chn);
Flg_Ent = 0;
Flg_Vfo = 0;
Flg_If = 0;
Vfo_Dat = Fnc_Eep_Lod4(Sav_Eep);
Fnc_Fdsp(Vfo_Dat);
lcd.setCursor(5,1);
lcd.print(CALL);
EEPROM.write(Vfo_Eep,Byt_Vfo);
}
else
Byt_Ent++;
}
}
}
//---------- Function Prameter PROC ----------------------
void Fnc_Prm(){
lcd.setCursor(5,1);
switch(Byt_Ent){
case 0: // IF Frequency load
if(Flg_If == 0){
Vfo_Dat = Fnc_Eep_Lod4(If_Eep);
Flg_If = 1;
}
lcd.setCursor(5,1);
lcd.print("IF ");
break;
case 1: // IF Frequency proc.
if(Flg_If == 1){
Fnc_Eep_Sav4(Vfo_Dat,If_Eep);
If_Dat = Vfo_Dat;
Flg_If = 0;
}
lcd.setCursor(5,1);
lcd.print("Offset");
if(Flg_LSB == 0){ // LSB Offset data load
Vfo_Dat = Fnc_Eep_Lod4(Care_Eep+0);
Flg_LSB = 1;
Flg_Mode = 1;
}
lcd.setCursor(13,1);
lcd.print("LSB");
break;
case 2: // LSB Offset proc.
if(Flg_LSB == 1){
Fnc_Eep_Sav4(Vfo_Dat,Care_Eep+0);
Flg_LSB = 0;
}
if(Flg_USB == 0){ // USB Offset data load
Vfo_Dat = Fnc_Eep_Lod4(Care_Eep+4);
Flg_USB = 1;
}
lcd.setCursor(13,1);
lcd.print("USB");
break;
case 3: // USB Offset proc.
if(Flg_USB == 1){
Fnc_Eep_Sav4(Vfo_Dat,Care_Eep+4);
Flg_USB = 0;
}
if(Flg_CW == 0){ // CW Offset
Vfo_Dat = Fnc_Eep_Lod4(Care_Eep+8);
Flg_CW = 1;
}
lcd.setCursor(13,1);
lcd.print("CW ");
break;
case 4: // VFO Mode Set
if(Flg_CW == 1){
Fnc_Eep_Sav4(Vfo_Dat,Care_Eep+8);
Flg_CW = 0;
Flg_Mode = 0;
}
if(Flg_Vfo == 0){
Byt_Vfo = EEPROM.read(Vfo_Eep); // Vfo Mode data
if(Byt_Vfo < 0)
Byt_Vfo = 0;
Flg_Vfo = 1;
}
Vfo_Dat = Fnc_Eep_Lod4(Sav_Eep);
lcd.setCursor(5,1);
lcd.print("VFO ");
lcd.setCursor(10,1);
switch(Byt_Vfo){
case 0:
lcd.print("Roff "); // TX=VFO RX=0
break;
case 1:
lcd.print("TR "); // TX=VFO RX=VFO
break;
case 2:
lcd.print("R+IF "); // TX=VFO RX=VFO+IF
break;
case 3:
lcd.print("TR+IF "); // TX=VFO+IF RX=VFO+IF
break;
default:
Byt_Vfo = 0;
lcd.print("Roff ");
break;
}
break;
default:
if(Flg_Vfo == 1){
EEPROM.write(Vfo_Eep,Byt_Vfo);
Flg_Vfo = 0;
}
lcd.setCursor(5,1);
lcd.print("IF ");
Byt_Ent = 0;
break;
}
}
//---------- Function Band -------------------------------
void Fnc_Band(long vfo){
if((vfo >= LW_VFO80) && (vfo < MI_VFO80)){ // 3.5MHz
Flg_Over = 0;
Byt_Mode = 2; // CW
}
else if((vfo >= MI_VFO80) && (vfo <= HI_VFO80)){
Flg_Over = 0;
Byt_Mode = 0; // LSB
}
else if((vfo >= LW_VFO40) && (vfo < MI_VFO40)){ // 7MHz
Flg_Over = 0;
Byt_Mode = 2; // CW
}
else if((vfo >= MI_VFO40) && (vfo <= HI_VFO40)){
Flg_Over = 0;
Byt_Mode = 0; // LSB
}
else if((vfo >= LW_VFO20) && (vfo < MI_VFO20)){ // 14MHz
Flg_Over = 0;
Byt_Mode = 2; // CW
}
else if((vfo >= MI_VFO20) && (vfo <= HI_VFO20)){
Flg_Over = 0;
Byt_Mode = 1; // USB
}
else if((vfo >= LW_VFO15) && (vfo < MI_VFO15)){ // 21MHz
Flg_Over = 0;
Byt_Mode = 2; // CW
}
else if((vfo >= MI_VFO15) && (vfo <= HI_VFO15)){
Flg_Over = 0;
Byt_Mode = 1; // USB
}
else if((vfo >= LW_VFO10) && (vfo < MI_VFO10)){ // 28MHz
Flg_Over = 0;
Byt_Mode = 2; // CW
}
else if((vfo >= MI_VFO10) && (vfo <= HI_VFO10)){
Flg_Over = 0;
Byt_Mode = 1; // USB
}
else if (Vfo_Dat < 10000000L){
Byt_Mode = 0; // LSB
Flg_Over = 1;
}
else{
Byt_Mode = 1; // USB
Flg_Over = 1;
}
}
//---------- Function IF Proc. ---------------------------
void Fnc_If(byte if_mode){
long bfo = Fnc_Eep_Lod4(Care_Eep+Byt_Mode*4);
switch(if_mode){
case 0: // Roff
RX_Dat = 0L; // RX = off
TX_Dat = Vfo_Dat; // TX = VFO
break;
case 1: // TR
RX_Dat = Vfo_Dat; // RX = VFO
TX_Dat = Vfo_Dat; // TX = VFO
break;
case 2: // R+IF
RX_Dat = Vfo_Dat + If_Dat + bfo; // RX = VFO + IF + bfo
TX_Dat = Vfo_Dat; // TX = VFO
break;
case 3: // TR+IF
RX_Dat = Vfo_Dat + If_Dat + bfo; // RX = VFO + IF + bfo
if(Byt_Mode == 2) // CW Mode?
TX_Dat = Vfo_Dat + If_Dat; // TX = VFO + IF
else
TX_Dat = Vfo_Dat + If_Dat + bfo;// TX = VFO + IF + bfo
break;
default:
RX_Dat = 0L; // RX = off
TX_Dat = Vfo_Dat; // TX = VFO
break;
}
if((RX_Dat != 0) && ((Flg_Rit == 1) || (Flg_Rit == 2)))
RX_Dat = RX_Dat + Rit_Dat;
if((Flg_Spl == 1) || (Flg_Spl == 2))
TX_Dat = TX_Dat + Rit_Dat;
}
3 件のコメント:
Hello, the annoying thing can be changed of FI, and add or subtract the FI from already thank you very much from Argentina
hi
i get an error,, rotary.h , no such file ,, in fact i have rotary.h, any help please
thank you
Jameel
Hi Unknown.
Please download the following zip file from JA2GQP's download site.
AD9850 DDS folder ad9850_V1.2.zipplease download it.
Included rotary.h in this zip file and modified it.
コメントを投稿